AMSOIL Arctic Synthetic Grease provides extreme low-temperature pumpability and superior protection for equipment operating in harsh climates where temperatures drop well below freezing, ensuring superior load and wear protection where conventional greases are ineffective.
Package sizes include:
AMSOIL Arctic Synthetic Grease is recommended for industrial machinery, heavy-duty automotive and industrial equipment, chassis, bearings, off-road and heavy equipment operating in arctic climates.
• Outstanding cold-temperature pumpability
• Excellent mechanical stability
• Superior protection against wear and corrosion
• Long service life
• Withstands high loads and pressures
AMSOIL Arctic Synthetic Grease is compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Arctic Synthetic Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL INC.
AMSOIL Arctic Synthetic Grease is available in 15-ounce cartridges. Singles, cases of 10 and 40 packs
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS).
Keep out of the reach of children. Don't pollute. Return used oil to collection centers.
|Typical Technical Properties - Arctic Synthetic Grease (GEC)|
|Thickener||calcium sulfonate complex|
|NLGI consistency grade||1|
|Penetration (25°C [77°F], 0.1 mm) worked 60 strokes (ASTM D217)||310-340|
|Operating Range, °F (°C)||-75 to 315 (-59 to 157)|
|Four-ball wear test, mm scar (ASTM D2266)||0.51|
|Four ball EP, kgf (ASTM D2596)|
|• Weld point||400|
|• Load wear index||56|
|Timken OK load test, lbs (ASTM D2509)||60|
|Low-temperature torque, N•m (ASTM D4693)|
(-40°C [-40°F]) (Starting, Running torque)
|LT-37 US Steel Mobility @ 0°F (g/min)||156.5|
|US Steel Mobility @ -20°F (g/min)||81.5|
|Dropping point, °F (°C) (ASTM D2265)||>550 (>288)|
|Rust and corrosion (ASTM D1743)||pass|
|Oil viscosity, 40°C (104°F), cSt (ASTM D445)||22.30|
|Viscosity Index (ASTM D2270)||125|